Study Of Chemical Concentration Of Main Ingredients For Making Portland Composite Cement

Loth Botahala, Herianus Manimoy, Yuwinta Erlina Tonu Lema, Eflin Dollu Klaping, M. Tang

Abstract


This study aims to determine the concentration of the main raw material compounds of cement making before adding limestone additives and determining the compressive strength and porosity and water absorption of cement before adding limestone additives. The result showed that cement with the concentration of 3CaO.SiO2 = 96,9%; 2CaO.SiO2 = negative; 3CaO.Al2O3 = 4,4%; 4CaO.Al2O3.Fe2O3 = 9.7%. If added limestone additive then it will decrease the adhesiveness and create a very wide pore can make a building becomes fragile. Such concentrated cement can not withstand the reaction of other particles from the air.


Save to Mendeley


Keywords


raw material of cement, analysis of concentration of cement compound

Full Text:

PDF

References


Botahala, L., & Pasae, Y. (2020). Kimia Semen : Suatu Kajian Literatur Ilmiah (1st ed.). Deepublish. http://repo.untribkalabahi.ac.id/xmlui/handle/123456789/265

Botahala, L. (2013). PERANAN ABU SEKAM PADI TERHADAP STABILITAS KUALITAS SEMEN PORTLAND KOMPOSIT YANG MENGGUNAKAN ADITIF BATU KAPUR [Universitas Hasanuddin Makassar]. http://repo.untribkalabahi.ac.id/xmlui/handle/123456789/243

Riyadi, M., & Amalia. (2005). Teknologi Bahan I. https://docplayer.info/73047427-Teknologi-bahan-i-oleh-drs-muhtarom-riyadi-sst-amalia-spd-sst.html

van Oss, H. G. (2005). Background Facts and Issues Concerning Cement and Cement Data. http://www.usgs.gov

Neville, A. M., & Brooks, J. J. (2010). Concrete Technology. In British Library (2nd ed.). Pearson Education. https://doi.org/10.6004/jnccn.2015.0201

Partana, E., Purijatmiko, A., Mahfud, & Prihatini, P. (2010). STUDI PENGARUH PENAMBAHAN SLAG DAN FLY ASH SEBAGAI BAHAN ADITIF DI FINISH MILL PABRIK SEMEN KOMPOSIT. https://www.google.com/search?q=Studi+pengaruh+penambahan+slag+dan+fly+ash+sebagai+bahan+aditif+di+finish+mill+pabrik+semen+komposit%2C&rlz=1C1CHBD_idID893ID893&oq=Studi+pengaruh+penambahan+slag+dan+fly+ash+sebagai+bahan+aditif+di++finish+mill+pabrik+seme

Priyo N.S., A., & Sofyan, A. (2012). Evaluasi Usaha Pengendalian Emisi Gas Rumah Kaca melalui Clean Development Mechanism (Studi Kasus : PT Indocement Tunggal Prakarsa Tbk). https://fa.itb.ac.id/wp-content/uploads/sites/8/2012/07/15308065-Antonius-Priyo-NS.pdf

Botahala, L. (2020). DETERMINATION RICE HUSK AMORPHOUS SILICA IN ALOR DISTRICT AS AN ADDITIVE ON THE MANUFACTURE OF COMPOSITE PORTLAND CEMENT. Scientific Journal Widya Teknik, 19(2), 74–78. http://jurnal.wima.ac.id/index.php/teknik/article/view/2103

Marzuki, I. (2009). Analisis Penambahan Additive Limestone Terhadap Kualitas Komposisi Kimia Semen Portland Jurnal Chemica Vo. Chemica: Jurnal Ilmiah Kimia Dan Pendidikan Kimia, 10(1), 64–70. https://doi.org/10.35580/CHEMICA.V10I1.400

Botahala, L., & Manimoy, H. (2014). STUDY ON CHEMICAL COMPONENT AND COMPRESSIVE STRENGTH OF PORTLAND COMPOSITE CEMENT USING LIMESTONE ADDITIVE. Indonesia Chimica Acta, 7(1), 19–22. http://repo.untribkalabahi.ac.id/xmlui/handle/123456789/244

Tennis, P. D., & Bhatty, J. I. (2006). Characteristics of Portland and blended cements: Results of a survey of manufacturers. IEEE Cement Industry Technical Conference (Paper), 83–101. https://doi.org/10.1109/citcon.2006.1635709

Botahala, L., Zakir, M., & Taba, P. (2013). PERANAN ABU SEKAM PADI TERHADAP KUALITAS MEKANIS FISIS SEMEN PORTLAND KOMPOSIT YANG MENGGUNAKAN ADITIF BATU KAPUR. Indonesia Chimica Acta, 6(2), 44–50. http://repo.untribkalabahi.ac.id/xmlui/handle/123456789/243




DOI: https://doi.org/10.33508/wt.v20i1.3020